4) You will need to have on hand toilet repair tape, small gas torch, solder, flux, plumbing sandpaper, pipe cutter, gas tape (to seal gas line) and maybe some pipe glue. Ask the sales person at the hardware store for a more defined list.
With a putty knife, carefully scrape the remaining parts of the wax ring from the area. Clean the spot so that the new wax ring will be level. Place a new wax ring on the opening and replace the toilet. Bolt it back onto the floor, reconnect the water line repair supply tube and watch for leaks as the water is turned back on.
After you have the stems out you should be able to find the washer on the "inside" end. If it is nicked, torn or brittle it is likely the cause of your drip. Even if it looks brand new, go ahead and replace it. You've already come this far. You can get replacement washers at almost any hardware store. Sometimes you may want to replace the whole stem, especially if the handle end is stripped out. It's best to just take the stem with you to the store and see if you can match it up. Most Do It Yourself stores have replacement stems for many popular brands. If your valve has a center diverter valve to switch the waterfrom the tub spout to the shower head the same process applies. Many times it is easier to replace the diverter stem than to repair it. This really depends on the design of the stem.
Working on the gas lines is also a complex job that only a licensed plumber can handle because it is very dangerous. Small leaks can't always be detected by odor alone, but a licensed professional has the proper equipment that's needed to ensure that you don't have any leaks in the line.
If the area around the fan isn't clean and dry, or if dust or any sort of growth has accumulated on the blades or inside the exhaust duct, it may be a warning sign of excess moisture build-up. Clean the water line repair fan and area well. Then double- check that the fan is operating properly.
Keep your hands clean and dry. Plumbing jobs get slippery, so it's important to work with a pair of sturdy gloves so you don't lose your grip and accidentally hurt yourself or break something.
A qualified plumbing company will not hesitate to show you its insurance policy. Make sure they are fully insured. Check if they have liability insurance and workers' compensation. Needless to say, you are putting yourself in danger if you hire a plumbing company with no insurance. Plumbers in Reading shows you its insurance policy up-front, no need to ask. We want you to know that it takes its work seriously and covers all the basics.